10.0.0.1 Admin Login – LPB Piso Wifi

Updated on

The IP address 10.0.0.1 is a private IP address that is commonly used as the default gateway or access point for routers in some networks. It belongs to the class A range of private IP addresses, which are reserved for use within private networks and are not routable over the public internet.

Many router manufacturers, such as LPB Piso WiFi and Xfinity Comcast use 10.0.0.1 as the default IP address for their routers’ admin panel. This IP address is typically used to access the router’s configuration settings and perform administrative tasks, such as setting up network parameters, changing wireless network settings, and managing security features.

10.0.0.1 Login

10.0.0.1 Piso wifi Portal at a Glance

Piso Wifi is one of the largest internet providers in the Philippines. Also known as Pisonet, it is an internet in the style of an arcade that was founded in the year 2011 and rose to fame and prominence in the year 2017 after PISONET was replaced by Piso Wifi.

In other words, Piso wifi is a type of private internet service that is found in the Philippines. However, it is also accessible in certain parts of the United States.

Wifi namePiso Wifi
Also known asPisonet
IP Address10.0.0.1
ConnectivityPrivate
Country for usePhilippines, USA
Type of serviceRental
AvailabilityGoogle Play Store
Launched date2011
Piso Wifi Vending machine2017
PopularityLow Cost

How To Login 10.0.0.1?

To access the 10.0.0.1 login page, follow these steps:

  1. Connect your device (e.g., computer, laptop, or mobile device) to your router via a wired or wireless connection.
  2. Open a web browser of your choice (e.g., Google Chrome, Mozilla Firefox, or Safari) and type “http://10.0.0.1” or simply 10.0.0.1 in the address bar.
  3. Once you have successfully accessed the 10.0.0.1 login page, you will be prompted to enter your login information.
  4. Enter the default username and password provided by your router manufacturer. Common default login credentials include “admin” for both the username and password, but it may vary depending on the router brand.
  5. Click on the “Login” button to proceed.
  6. If the Login info is correct, you will be granted access to the router’s admin panel, where you can customize various settings according to your preferences.

Note: If you have changed the router’s password before, and if you don’t remember your router’s Admin password, you’ll have to factory reset the router.

Default Username and Password for 10.0.0.1

Xfinity/Comcastadminpassword
LPB Piso WiFiadmin
administrator		123456789
admin1234

Troubleshooting Common Issues with 10.0.0.1

  • Check IP Configuration: Make sure that your device’s IP configuration is correctly set to obtain an IP address automatically (DHCP). If you have manually set the IP address to 10.0.0.1, ensure that it doesn’t conflict with any other devices on the network.
  • Restart the Router: Power cycle your router by unplugging it from the power source, waiting for a minute, and then plugging it back in. This can often resolve temporary network issues.
  • Check Physical Connections: Ensure that all the network cables, such as Ethernet cables or coaxial cables, are properly connected to the router and the devices.
  • Disable Firewall or Antivirus: Temporarily disable any firewall or antivirus software on your device and check if the issue persists. Sometimes, these security programs can interfere with network connectivity.
  • Reset Router to Factory Defaults: If you’re still facing issues, you can try resetting your router to its factory default settings. This can be done by pressing the reset button on the router for about 10-15 seconds. However, note that this will erase all your router’s settings, including the Wi-Fi network name and password, and you will need to reconfigure the router.
  • Update Router Firmware: Check if there is a firmware update available for your router model on the manufacturer’s website. Updating the router firmware can sometimes fix known issues and improve overall performance.
  • Check Network Settings: Access the router’s web interface by typing 10.0.0.1 in your web browser and check the router’s network settings, such as DHCP settings, Wi-Fi settings, and security settings. Ensure that they are configured correctly.
  • Contact ISP or Router Manufacturer: If you’ve tried all the above steps and are still facing issues, it’s recommended to contact your Internet Service Provider (ISP) or the router manufacturer’s support for further assistance. They may be able to provide more specific troubleshooting steps or identify any known issues with your router model.

Remember to always exercise caution when troubleshooting network issues, and be sure to follow the manufacturer’s instructions and recommendations.